Ok all, there is a slight issue with these pins, nothing major.
The original AF1 style pins I've based mine on are all the same length, this is for the simple reason that they are universal and therefore will fit either the tank or the seat.
The nearside seat pin clashes with the coil as it's too long. This leaves us with one of 3 choices,
1) I supply them all the same length and you chop them to suit your needs.
2) I supply them all the same length and you move the coil out of the way (should be a ble to bend the bracket slightly)
3) You specify if you want one pin slightly shorter for the seat set and I will shorten it.
The choice is entirely yours and will be on an individual basis.
FYI installation instructions are here, not sure how they expect you to put the nut and washers on from the bottom, I removed the rear fairing for ease.
http://www.af1racing.com/store/usermods ... ipinfo.htm
Send me a PM with your address, and send payment to
wayne.french15@yahoo.co.uk (£8 per set). In the PM put which of these three options you would like and also state how many sets you want and what their purpose is. When you send the paypal payment please put in their what your id is on here, or alternatively put in your PM what the e-mail address you sent the paypal from is. I need to keep to two tied together somehow or I'll get in a right mix up.
i.e. 1 set for seat with a shorter left hand pin or 2 sets, one of each with all pins the same length
As previously mentioned I will supply seat sets with a stainless washer and tank ones with nylon washers.