Chat for Falco Owners.
Moderators: Aladinsaneuk, MartDude, D-Rider, Moderators
-
zoidberg
- SuperSport Racer
- Posts: 680
- Joined: Fri Jun 04, 2010 7:27 am
- Location: Cumbria
#1
Post
by zoidberg » Mon Aug 26, 2013 11:48 am
What years Mille damper fits ours? Mine likes to shake its head a lot....
-
Aladinsaneuk
- Aprilia Admin
- Posts: 9503
- Joined: Wed Jan 03, 2007 10:37 pm
- Location: Webfoot territory
#2
Post
by Aladinsaneuk » Mon Aug 26, 2013 11:50 am
All the gen 1's
Early cheap red non adjustable red Sachs and slightly later ohlins
Make sure you get the mounting bits...
Let's face it, you wouldn't go to a nurse to get good advice on a problem with a Falco - you'd choose an Engineer or a mechanic...
-
zoidberg
- SuperSport Racer
- Posts: 680
- Joined: Fri Jun 04, 2010 7:27 am
- Location: Cumbria
#3
Post
by zoidberg » Mon Aug 26, 2013 12:16 pm
Ta, what mounting bits?
I'm sure the new rear shock I'm searching for will help calm it down. But would still like one.
-
Aladinsaneuk
- Aprilia Admin
- Posts: 9503
- Joined: Wed Jan 03, 2007 10:37 pm
- Location: Webfoot territory
#4
Post
by Aladinsaneuk » Mon Aug 26, 2013 12:50 pm
The connections from the damper to the frame - look at ultimate parts for the drawing
Let's face it, you wouldn't go to a nurse to get good advice on a problem with a Falco - you'd choose an Engineer or a mechanic...
-
Shetland Woody
- Clubman Racer
- Posts: 306
- Joined: Sun Nov 06, 2011 4:29 pm
#5
Post
by Shetland Woody » Mon Aug 26, 2013 6:50 pm
Definatly try and get the mounting bits, I got the damper on its own and I've still not got around to fitting it. Just for a couple of shouldered shims and bolts basically it comes to around £30 before postage etc, quite expensive for what it is. I really must get around to ordering them.
