It was going so well....

Message

fatboy · #1 Post by **fatboy** » Thu Sep 06, 2012 6:36 pm

The battle to get the falco done is in its final stages,despite a wasted day yesterday because my paddock stand didnt arrive ( 24 hr express delivery means when I can be bothered to Pacelfarce drivers), got a lot done today, tyres fitted for £20, would have been £10 if the boss wasnt in,
old blue spring shock out, dropped white spring unit in, went to start bolting it up and.....................

the valve will not clear the subframe, its fouling by 1 to 2 mm,
Think Im going to carefully grind it

Aladinsaneuk · #2 Post by **Aladinsaneuk** » Thu Sep 06, 2012 6:44 pm

erm

you have searched about fitting a white spring shock here haven't you.....

i think that in the vast majority of cases, people have to dremel off 1 to 2 mm - and yes use a dremel not a grinder

you will also find that the cover won't fit on either..... but once the above is done its well covered....

(And i am sorry - i did think you knew this already....)

fatboy · #3 Post by **fatboy** » Thu Sep 06, 2012 7:50 pm

Must admit to being a minimum effort searcher,therefore didnt read everything I should have read, being dyslexsic helps too, being an impatient twat helps even more

Have to put my hand up and say I didnt know cos i didnt read it

Aladinsaneuk · #4 Post by **Aladinsaneuk** » Thu Sep 06, 2012 8:54 pm

no worries

pm one of us if you need to call to answer questions

flatlander · #5 Post by **flatlander** » Thu Sep 06, 2012 9:57 pm

And they'll just ignore you ;)

Aladinsaneuk · #6 Post by **Aladinsaneuk** » Thu Sep 06, 2012 10:21 pm

we just recognise your number Geoff

its on so many toilet walls - even in Russia iirc.....