Falco parts

Message

szrdave · #1 Post by **szrdave** » Sun Oct 20, 2013 10:32 pm

Having sold my Falco (it sounded great as the new owner rode off on it

) I've got a few bits left over:

Ohlins rear shock - To be removed from the bike this weekend*, blinkey501 has called first dibs

Oberon clutch slave cylinder - £40 (or £45 posted)
Fits with the standard sprocket cover and lightens the lever nicely

NWS tubular aluminium exhaust hangers - £20 (or £25 posted)
These remove the rear pegs and lighten the look of the rear end nicely. I used them as bungee mounting points when carrying luggage so there are plenty of small scratches, but they don't detract from the look too much. More pictures when they're removed this weekend but this is them on the bike:

Two steering dampers, one RSV red body with fitting kit, one later Aprilia with sliver body and no mounting kit.
Both are oil tight but have some marks, let me know if you want a picture.

£15 each

* He lives around the corner and is bringing it back for the swap. I'm not sneaking around in the middle of the night with a socket set

Falco668 · #2 Post by **Falco668** » Mon Oct 21, 2013 8:13 am

If for some unknown reason the Ohlins does not go, i would like to have 2nd dibs, many thanks

zoidberg · #3 Post by **zoidberg** » Mon Oct 21, 2013 8:54 am

Steering damper pics please

wayno · #4 Post by **wayno** » Mon Oct 21, 2013 10:18 am

Dibs on the rear hangers please. PM Sent

fatboy · #5 Post by **fatboy** » Mon Oct 21, 2013 7:03 pm

PM sent, looks like your inbox is busy !

flatlander · #6 Post by **flatlander** » Mon Oct 21, 2013 7:34 pm

Steering damper and 2nds on the hangers please

szrdave · #7 Post by **szrdave** » Mon Oct 21, 2013 8:25 pm

Quick update - Hangers and RSV steering damper with fitting kit both gone.

Oberon slave cylinder and the other steering damper are still available:

flatlander · #8 Post by **flatlander** » Mon Oct 21, 2013 8:43 pm

What's needed for fitting it ?

randomsquid · #9 Post by **randomsquid** » Mon Oct 21, 2013 8:57 pm

flatlander wrote:What's needed for fitting it ?

A fitting kit...
Or did you mean spanners and stuff?

szrdave · #10 Post by **szrdave** » Mon Oct 21, 2013 9:04 pm

randomsquid wrote:
flatlander wrote:What's needed for fitting it ?
A fitting kit...

Basically a pair of funny shaped washers for the body and a cylindrical spacer for the rod end.

I'm afraid it may have been taken though flatlander, just waiting on confirmation.

szrdave · #11 Post by **szrdave** » Tue Oct 22, 2013 8:17 pm

Just the Oberon left now

Aladinsaneuk · #12 Post by **Aladinsaneuk** » Tue Oct 22, 2013 9:30 pm

i have to be honest and say that is the first time i have ever seen that silver sachs unit......

rare!

szrdave · #13 Post by **szrdave** » Sat Oct 26, 2013 9:35 pm

I also have a Forza EPROM chip programmed for a Falco with open pipes and drop in air filter.

Fitted to my bike once, and it didn't agree with it (lumpy low down fueling, cured by TB balance according to Forza).

£30 posted.

szrdave · #14 Post by **szrdave** » Wed Oct 30, 2013 7:16 pm

Oberon gone!