I hate monkeys with tools!!!

Message

flatlander · #16 Post by **flatlander** » Sun Apr 21, 2013 9:11 pm

whoosh

yet another thing goes right over my head

anyone good on MS Lync?

Cathcart · #17 Post by **Cathcart** » Mon Apr 22, 2013 5:04 pm

Done! Mwahahaha.

Tried tightening other bolts but the head of the bad one was too badly mangled, tried hammering a larger bit on but just couldn't get it in far enough even with a copper hammer. Wasn't wanting to proper hit it.
Drilled the head off and out it turned by finger tips.

All bled and done. Going to give it a quick bleed again tomorrow just to make sure.

Cathcart · #18 Post by **Cathcart** » Mon Apr 22, 2013 5:05 pm

Feel this deserves a separate post.

Thanks folks, genuinely appreciated.

fatboy · #19 Post by **fatboy** » Mon Apr 22, 2013 5:34 pm

Result

Aladinsaneuk · #20 Post by **Aladinsaneuk** » Mon Apr 22, 2013 5:35 pm

Best get your tight fife arse in the bar and get the beers in....

danthewhippet · #21 Post by **danthewhippet** » Mon Apr 22, 2013 5:46 pm

Yer right there, Fifers are known up here for having short arms and very deep pockets

Cathcart · #22 Post by **Cathcart** » Mon Apr 22, 2013 5:46 pm

Tell me about it! Love it when a plan comes together, thanks to you guys though

Hahaha, I would get my tight Fife arse into the bar.... But I've kuk sool tonight. Hahaha.

Next job... Clutch jet... I'll need to order a screwdriver as the ones I have that fit the new jet don't fit into the hole to remove the old one. Nothings ever simple. Hahaha.

fatboy · #23 Post by **fatboy** » Mon Apr 22, 2013 5:48 pm

No chance, he had to buy a drill bit

danthewhippet · #24 Post by **danthewhippet** » Mon Apr 22, 2013 5:49 pm

on another note, was reading through some o the tech posts, trying to learn

Am wondering how cathcart got on with the 300amp kill switch?

Cathcart · #25 Post by **Cathcart** » Mon Apr 22, 2013 5:51 pm

I've moved it from the house to the garage mate... Getting there!

Your right though... Deep pockets and short arms. Although I won't be parking up in Glasgow.... Known for nabbing the sugar out your tea!

Aladinsaneuk · #26 Post by **Aladinsaneuk** » Mon Apr 22, 2013 6:58 pm

Christ I thought our Yorkshire lot were tight

Is it true that Hadrians wall is some form of northern wailing wall for all you closet Red Sea pedestrians?

randomsquid · #27 Post by **randomsquid** » Mon Apr 22, 2013 8:48 pm

Aladinsaneuk wrote:Christ I thought our Yorkshire lot were tight

Use more lube.
HTH

Aladinsaneuk · #28 Post by **Aladinsaneuk** » Mon Apr 22, 2013 9:06 pm

That the secret of a well fitting hat?

danthewhippet · #29 Post by **danthewhippet** » Mon Apr 22, 2013 9:28 pm

They spent all that time building a nice wall and we nicked it for ammo

, and when they buggered off we nicked more of it fer hooses, must be something in the genes!

Cathcart · #30 Post by **Cathcart** » Wed Apr 24, 2013 9:42 pm

So...
Looking at my clutch jet... I need a screwdriver to fit... Through a bit of googling I came up with two sizes, 4mm and 5.5mm. Anybody know which size screwdriver I'm needing? I'm leaning towards the 5.5mm.