Disc bolts, rear
Moderators: Aladinsaneuk, MartDude, D-Rider, Moderators
-
Falcopops
- GP Racer
- Posts: 2530
- Joined: Mon Dec 18, 2006 4:00 pm
- Location: Back to sweating in the tropics
- Main bike: Still loving the Falco
IIRC the spedo changes every 2 seconds, but that seems a bit long to be right.
I was thinking that you could stick a few magnets to the tops of some uber sexy titanium bolts, but of course they won't stick to Ti
I put a race dash on a mates trumpet and had to epoxy and gaffer tape for good measure a magnet to his front wheel and the sensor to his fork leg to make it work (the generic bracketry was shit and wouldn't fit anywhere).
So I reckon magnets would work, but I don't know if the induced current from their field would be too much for the sensor/circuitry. Probably not since we must be talking very small numbers.
This is right up D-Riders alley, do chime in old boy.
I was thinking that you could stick a few magnets to the tops of some uber sexy titanium bolts, but of course they won't stick to Ti
I put a race dash on a mates trumpet and had to epoxy and gaffer tape for good measure a magnet to his front wheel and the sensor to his fork leg to make it work (the generic bracketry was shit and wouldn't fit anywhere).
So I reckon magnets would work, but I don't know if the induced current from their field would be too much for the sensor/circuitry. Probably not since we must be talking very small numbers.
This is right up D-Riders alley, do chime in old boy.
