beers all round after a busy day
Moderators: Aladinsaneuk, MartDude, D-Rider, Moderators
- Aladinsaneuk
- Aprilia Admin
- Posts: 9503
- Joined: Wed Jan 03, 2007 10:37 pm
- Location: Webfoot territory
beers all round after a busy day
To celebrate ....
today I have mainly been working on falco's :)
PhilH's bike now has a sidestand that does not scare folk....
He also has brakes that do not pulse - the semi floating bits now semi float again!
Then Carl's oasis green turned up....
Right hand side clip on fitted, Gabro chip installed and then a motopike clutch slave - i fitted and carl bled it as i was well pissed off with it.. sometimes they work as they should other times..... I will honestly say that having a bleed nipple at the top of the circuit is a VERY good idea :)
Hanna's Oasis was next - new battery and optimate leads fitted - fired up for the first time in a long time... Also changed her front wheel for one with a tyre that matches her rear tyre....
Finally took a gixxer stand and made a bracket so it would fit on my bike - my belly pan is obviously different LOL - and after Mr Dremel had played... its fitted :)
So - am sitting down with a tinnie... which will be followed by more beer... lots more beer as Leeds beat Posh - no big shakes, but annoyinbg any member of the ferguson family is always a good thing :)
today I have mainly been working on falco's :)
PhilH's bike now has a sidestand that does not scare folk....
He also has brakes that do not pulse - the semi floating bits now semi float again!
Then Carl's oasis green turned up....
Right hand side clip on fitted, Gabro chip installed and then a motopike clutch slave - i fitted and carl bled it as i was well pissed off with it.. sometimes they work as they should other times..... I will honestly say that having a bleed nipple at the top of the circuit is a VERY good idea :)
Hanna's Oasis was next - new battery and optimate leads fitted - fired up for the first time in a long time... Also changed her front wheel for one with a tyre that matches her rear tyre....
Finally took a gixxer stand and made a bracket so it would fit on my bike - my belly pan is obviously different LOL - and after Mr Dremel had played... its fitted :)
So - am sitting down with a tinnie... which will be followed by more beer... lots more beer as Leeds beat Posh - no big shakes, but annoyinbg any member of the ferguson family is always a good thing :)
Let's face it, you wouldn't go to a nurse to get good advice on a problem with a Falco - you'd choose an Engineer or a mechanic...
- slickliner6
- SuperSport Racer
- Posts: 548
- Joined: Fri Feb 10, 2012 1:26 pm
- Location: GT Yarmouth
- blinkey501
- World Champion
- Posts: 3494
- Joined: Sun May 29, 2011 6:28 pm
- Location: near doncaster
I've earnt a beer or two as well. Not been playing with the Falco as I've been lumber jacking in the garden.
Lalandi are b'gers. Look big at a distance, double in size whn you get close, double again when they're down and again when it comes to clearing them away.
Lalandi are b'gers. Look big at a distance, double in size whn you get close, double again when they're down and again when it comes to clearing them away.
Don't put off 'till tomorrow what you can enjoy today
- Aladinsaneuk
- Aprilia Admin
- Posts: 9503
- Joined: Wed Jan 03, 2007 10:37 pm
- Location: Webfoot territory
Re: beers all round after a busy day
Aladinsaneuk wrote: Right hand side clip on fitted, Gabro chip installed and then a motopike clutch slave - i fitted and carl bled it as i was well pissed off with it.. sometimes they work as they should other times..... I will honestly say that having a bleed nipple at the top of the circuit is a VERY good idea :)
...... so the view that spending very little for a bleed nipple at the master cylinder is not worth it when you have the "foolproof" bleed method has been revised then?
Hands up all those trying to suppress comments of "Told you so"
“Scientists investigate that which already is. Engineers create that which has never been.”
-- Albert Einstein
-- Albert Einstein
- Aladinsaneuk
- Aprilia Admin
- Posts: 9503
- Joined: Wed Jan 03, 2007 10:37 pm
- Location: Webfoot territory
- Aladinsaneuk
- Aprilia Admin
- Posts: 9503
- Joined: Wed Jan 03, 2007 10:37 pm
- Location: Webfoot territory
- Aladinsaneuk
- Aprilia Admin
- Posts: 9503
- Joined: Wed Jan 03, 2007 10:37 pm
- Location: Webfoot territory
-
- Clubman Racer
- Posts: 306
- Joined: Sun Nov 06, 2011 4:29 pm