Page 1 of 1
Plate holder/indicators
Posted: Sun Aug 03, 2008 12:23 pm
by MoonTheLoon
Re: Plate holder/indicators
Posted: Sun Aug 03, 2008 1:09 pm
by Kwackerz
MoonTheLoon wrote: Any thoughts?
Yeah, it's like a desert in here...
The Bar
If you do a search of Here and the Archive, you'll find some cheaper,much better looking options made by ARS members themselves.
Not that the guys here will stop you from spending money... far from it...
Re: Plate holder/indicators
Posted: Sun Aug 03, 2008 2:01 pm
by Fausto
thoughts.... those indies look yuk!
Are you after the tail tidy element or the indy part?
Here's the one I got
Here
but you need your own indies. Looks good though.
Posted: Sun Aug 03, 2008 2:24 pm
by D-Rider
BTW welcome MoonTheLoon .... guess I should ask Who Are You ?
Posted: Sun Aug 03, 2008 3:46 pm
by MoonTheLoon
Thx everybody for their feedback. Fausto - what size plate does the bracket you got take? Regular (whatever that might be) or will it take a smaller plate (6x4 for example). Also, what rear indicators have you got? Just bought a silver Falco and so am starting to customise it a bit. Also, do you know where I can get the smoked tail lights - cheers, Keith
Posted: Sun Aug 03, 2008 4:00 pm
by Fausto
Keith - I suggest you post a thread asking for a smoked lens and see what happens
The bolt spacing on the tail tidy is 150mm so plates narrower than that might be a problem.
The indy mounts are 140mm apart so if you use a big plate and have short stem indies you may experience difficulties.