Page 1 of 1
Evoluzione tail tidy
Posted: Thu Jul 14, 2011 3:13 pm
by greybika
Hi, I've seen one of these on fleabay and wondered if any one has any experiences of fitting them.
I've checked the company's site and there is no mention of relocating the number plate light.
I'm concerned because I don't want to buy it and then find that there is extra expense involved and more importantly the drilling of loads of holes in my beautiful Falco (although the instructions do mention the need for one extra hole).
Any advice welcome :)
Posted: Thu Jul 14, 2011 4:52 pm
by Aladinsaneuk
some LED number plate lights - end of problem
and btw - a number plate light is NOT a legal requirement... if fitted it must work but.....
Posted: Thu Jul 14, 2011 4:56 pm
by Samray
Aladinsaneuk wrote:some LED number plate lights - end of problem
and btw - a number plate light is NOT a legal requirement... if fitted it must work but.....
Did you mean LED numberplate bolts?
Posted: Thu Jul 14, 2011 8:00 pm
by Aladinsaneuk
Yep sorry!
Posted: Thu Jul 14, 2011 10:01 pm
by Nooj
Don't worry about the light, as Aladin says it only has to work if fitted, if it's not fitted, it's not a problem, it'll still pass an MoT.
Posted: Thu Jul 14, 2011 11:36 pm
by Falcopops
IIRC the unit does come with a light and does need a hole to be drilled to fit it.
I ditched mine pretty quickly as the bulbs kept blowing, I've now got LED bolts.
Interestingly (or not) the light bowl in the kit is completely clear so when mounted displays a white light at the rear of the bike which is technically a MOT fail, although I never had a problem at the MOT (apart from the bulbs).
Posted: Fri Jul 15, 2011 8:45 am
by furygan man
Alads LED light bolts worked for me! He should be on comission!
BTW Paul how was the Warfe Inn last Friday??