Master cylinder piston stuck.

Mechanical woes? Ask other members for tips and advice.

Moderators: Aladinsaneuk, MartDude, D-Rider, Moderators

Post Reply
Message
Author
maz
Despatch Rider
Posts: 47
Joined: Tue Mar 29, 2011 12:35 pm
Location: DEVON

Master cylinder piston stuck.

#1 Post by maz » Wed Apr 29, 2020 8:28 pm

Hi, master cylinder piston stuck/seized fully in bore?, does not look corroded, I had a leaking front brake line and I think the seals dried out. sorry stick with me before you switch off, this is on a magura master cylinder on my old 1996 r850 which I have had stored for about 4 years. Seal kit comes with a new piston so as compressed air did not work or heating the cylinder I thought I would drill and tap the piston and pull it out, extreme measures but I,m hoping to rescue the master cylinder as replacements are ridiculously expensive.
Anyway, anybody tried this before? any advice?
Cheers mike.

User avatar
BikerGran
Gran Turismo
Posts: 3924
Joined: Sun Dec 17, 2006 5:12 pm
Location: Any further south and I'd fall off!

Re: Master cylinder piston stuck.

#2 Post by BikerGran » Wed Apr 29, 2020 9:54 pm

My first thought is, can you get a replacement piston?
The tragedy of old age is not that one is old, but that one is young.

maz
Despatch Rider
Posts: 47
Joined: Tue Mar 29, 2011 12:35 pm
Location: DEVON

Re: Master cylinder piston stuck.

#3 Post by maz » Thu Apr 30, 2020 8:12 pm

New piston comes with the replacement seals fitted in a kit with a new seal/bellows for the reservoir and some silicon grease all for the princely sum of £52ish.

RiceBurner
Track Day Addict
Track Day Addict
Posts: 114
Joined: Wed Dec 11, 2019 2:29 pm

Re: Master cylinder piston stuck.

#4 Post by RiceBurner » Fri May 01, 2020 2:28 pm

take the banjo bolt off the other end and knock it out with a suitable drift.

Just be careful not to mark the inside of the cylinder.

fatboy
World Champion
Posts: 3774
Joined: Thu Nov 03, 2011 7:48 pm
Location: BATH

Re: Master cylinder piston stuck.

#5 Post by fatboy » Fri May 01, 2020 4:13 pm

Good advice from Rice burner,
If you can drift the piston from either end of the bore then hopefully it will free up the ' stiction ', failing that leave the bloody thing in a jar soaking in fluid for as long as possible
Cleverly disguised as an adult !

User avatar
mangocrazy
Admin
Admin
Posts: 3903
Joined: Thu Jul 17, 2008 3:24 pm
Location: Sheffield, UK

Re: Master cylinder piston stuck.

#6 Post by mangocrazy » Fri May 01, 2020 6:53 pm

If the piston is rusted to the bore, then immersing the whole lot in a citric acid solution may work. Citric is brilliant stuff for eating rust. The hotter the solution, the faster it works. I put small parts for de-rusting in my cheapo ultrasonic bath in a citric solution. The rust fairly melts away.

maz
Despatch Rider
Posts: 47
Joined: Tue Mar 29, 2011 12:35 pm
Location: DEVON

Re: Master cylinder piston stuck.

#7 Post by maz » Thu May 14, 2020 8:09 pm

Interesting idea with the citric acid, I would have tried that. Drilled and tapped the piston, its only aluminium and sacrificial as the kit comes with a new piston and seals. the piston actually twisted in the bore when using the tap I probably could have pulled it out like a cork. Used a bolt as a puller. Bore all good cleaned out all the debris fitted kit and bled the brakes really easy much easier than the rear. Very happy all seems good.
Fitted new battery, bike started first turn very impressed I don't think I've run the bike for at least 2 years.

User avatar
Gio
Double World Champion
Posts: 6179
Joined: Sun Dec 17, 2006 8:28 pm
Location: Chertsey

Re: Master cylinder piston stuck.

#8 Post by Gio » Fri May 15, 2020 8:40 am

maz wrote:
Thu May 14, 2020 8:09 pm
I don't think I've run the bike for at least 2 years.
Beware the rubber then, might have gone hard.
I hate it when people ask if you have a bathroom, I want to say "No we pee in the garden"

Post Reply