Page 1 of 1

Wanted!!

Posted: Mon Mar 29, 2010 4:27 pm
by tommy
Bit of a long shot - has anyone got a spare headlight loom? Just need the bit that plugs into the back of the headlight
Number 10 on this diagram

Will pay an arm and a leg
ta
Tom :smt001 Image

Posted: Mon Mar 29, 2010 4:37 pm
by Nooj
'Fraid not. But I need part number 3 from that diagram, I had two lying around somewhere and have lost them both now I want one of them :smt013

Posted: Mon Mar 29, 2010 9:17 pm
by Falcopops
Tommy, if you're desperate and it sounds like you are, make one up.

IIRC there are only three wires in the connector 1 Headlight, 1 for both mains and 1 earth.

Get some wire (judge the thickness from the others in there) pop the spades out of the connector block and put spade connectors on the wires and join them up.

Get the spades with caps on them to avoid shorts. That'll keep you going 'till you can get a new one.

Posted: Mon Mar 29, 2010 9:41 pm
by Falcopops
Nooj,

This might work as a temp solution

http://www.apriliaforum.com/forums/show ... stcount=11

Prolly have to pop the spades out of the connector block and tape them.

Posted: Mon Mar 29, 2010 10:21 pm
by tommy
Falcopops wrote:Tommy, if you're desperate and it sounds like you are, make one up.

IIRC there are only three wires in the connector 1 Headlight, 1 for both mains and 1 earth.

Get some wire (judge the thickness from the others in there) pop the spades out of the connector block and put spade connectors on the wires and join them up.

Get the spades with caps on them to avoid shorts. That'll keep you going 'till you can get a new one.
Thats the route im going to have to take i think
Out comes my trusty crimping tool

Posted: Tue Mar 30, 2010 1:08 am
by Falcopops
tommy wrote:Out comes my rusty crimping tool
:smt107

contain yourself man, it's not that exciting!