Page 1 of 1

Wanted: Standard license plate light

Posted: Sat Aug 10, 2013 9:23 pm
by Firestarter
Anyone got a standard license plate light to fit a Falco to sell? Bolts sheared when taking it off to fit the new tail tidy

Thanks in advance

Posted: Sat Aug 10, 2013 9:30 pm
by Aladinsaneuk
Use the led bolt bulbs

But

It's not a requirement for mot - iirc if fitted it must work

Posted: Sun Aug 11, 2013 3:38 am
by blinkey501

Posted: Sun Aug 11, 2013 8:38 am
by D-Rider
90% sure that I've got one.

Posted: Sun Aug 11, 2013 9:59 am
by wayno
Did they shear completely off? Mine sheared half way but there was still enough to get a nyloc on

Posted: Sun Aug 11, 2013 11:59 am
by Firestarter
Nope, one probably could get a couple of threads picked up, but the other is too short to stick through the tidy. Typically, they're moulded into the plastic, too much faff to dig them out and replace them

Had a look at the bolt lights, not overly keen on them. Although it's plasticky, the stock one is fairly unobstrusive, saw some Motrax efforts but £15 is a bit much for some plastic and leds.

Andy, let me know what you want for the one you've (maybe) got, no rush, quite happy to run without for a while, but will fit one - one less thing for some picky copper to use as an "excuse" to pull you over

Posted: Sun Aug 11, 2013 10:29 pm
by D-Rider
Sorry - had to visit my mum today so not had a chance to look. I'll try to remember to have a look tomorrow - if I forget give me a nudge.

Posted: Sun Aug 11, 2013 10:33 pm
by randomsquid
I might have bits of one, can't remember what I did to it when I took it off. I'll have a look tomorrow.

Posted: Mon Aug 12, 2013 4:54 pm
by randomsquid
Got one. It's scruffy but usable. Threads are rusty as hell but intact. Bulb holder is toast though.
PM me an address and you can have it.

Posted: Mon Aug 12, 2013 5:41 pm
by Firestarter
Cheers squid, details on the way over :smt023

Posted: Mon Aug 12, 2013 6:03 pm
by randomsquid
I'll pop it in the post. :smt002
Probably be tomorrow, not short of post offices round here.

Posted: Wed Aug 14, 2013 5:17 pm
by randomsquid
Posted it yesterday evening should be with you tomorrow with a bit of luck.
Got a dirty look from the postwoman when I walked up to the counter and whipped my packet out of my leathers.

Posted: Wed Aug 14, 2013 7:24 pm
by Firestarter
randomsquid wrote:Posted it yesterday evening should be with you tomorrow with a bit of luck.
Got a dirty look from the postwoman when I walked up to the counter and whipped my packet out of my leathers.
Not surprised! :smt005

Cheers matey, will let you know when it's arrived, and hopefully pop some pics up of the finished article