Falco Bar Riser Kit

General Aprilia banter

Moderators: Aladinsaneuk, MartDude, D-Rider, Moderators

Post Reply
Message
Author
Robho
Despatch Rider
Posts: 13
Joined: Sun Apr 13, 2014 11:24 am
Location: Tunbridge Wells

Falco Bar Riser Kit

#1 Post by Robho » Mon Apr 27, 2015 11:06 am

I found this historic thread using CNC bar risers (etc):

https://www.ridersite.com/viewtopic.php?t=7388

Anyone on here used this and be willing to give some feedback please?

Many thanks

wayno
SuperBike Racer
SuperBike Racer
Posts: 904
Joined: Thu Apr 15, 2010 1:55 pm
Location: Buckinghamshire

#2 Post by wayno » Mon Apr 27, 2015 2:23 pm

I have done this using tuono bar risers and yoke. I bought a pre-butchered fairing as I couldn't bring myself to cut up my good one.

The position is much more comfortable. The front feels a lot more twitchy, but that's because I've hardly ridden it since the change. I have installed a damper, but not test ridden it yet.

There are some others that have done this who will give you some more in depth feedback.

Have you tried helibars or switching the std bars above the yoke first?
Pass me a hammer, a spanner and a cuppa

Post Reply