Page 1 of 1
DB killers Power killers?
Posted: Tue Oct 25, 2011 5:59 pm
by blinkey501
Decided to fit the DB killers to the motad venoms i bought off the falconilists has i woke the next door neighbour who had been working nights. But riding the bike seems to have lost its oooomph. Dont get me wrong it still nips on but its not the same
Does the DB killers kill the power or is it coincidence
Posted: Tue Oct 25, 2011 6:04 pm
by Aladinsaneuk
Well - yep that's about the size of it
Our engines like to breathe and fart well.... I prefer my renegades open but my neighbours are used to me :)
Posted: Tue Oct 25, 2011 6:20 pm
by Falconihlist
I have to fit the baffles to my gpr cans next week for the MOT. It'll be the first time they've been used, so I'm expecting the bike to be alot quiter, and not so eager. At least it is only for a day though
Posted: Tue Oct 25, 2011 8:24 pm
by HisNibbs
I found it hard to tell the difference.
If i remember the supplier said a drop of 2 or 3 BHP which is hard to feel on the road when normaly using 60 to 70 of 120BHP.
Posted: Tue Oct 25, 2011 8:58 pm
by dyzio
You might simply be missing the "grin factor" empty exhausts usually produce (excluding neighbours working nightshifts ;))
Posted: Tue Oct 25, 2011 9:26 pm
by randomsquid
Mine seems to pootle along fine with the Venoms and db killers.
Does seem to have a fueling issue at about 11k though, just stops pulling.
Posted: Tue Oct 25, 2011 9:34 pm
by D-Rider
randomsquid wrote:Mine seems to pootle along fine with the Venoms and db killers.
Does seem to have a fueling issue at about 11k though, just stops pulling.
Posted: Tue Oct 25, 2011 9:39 pm
by Samray
Posted: Wed Oct 26, 2011 7:56 am
by Falco668
I just got hold of said Venoms, sound great but not quite as good as my Leo Vinces were
. Did you find one "killer" was spot welded in place and one was loose?, or is it just me!!!. Not run without them in yet, got my 15T front to fit tomorrow, good times!!!!.
Posted: Wed Oct 26, 2011 6:48 pm
by blinkey501
Not reaaly noticed the spot welds has i really didnt want to fit them, only for MOT if course. A 15 tooth front sprocket mill make the falco a lot easier to live with. If only the wife was has easy to live with
Posted: Wed Oct 26, 2011 7:08 pm
by randomsquid
Falco668 wrote: Did you find one "killer" was spot welded in place and one was loose?
Mine are held in the end of the tailpipes with screws. I've not seen any the same yet so I'm guessing they're just generic baffles that someone attached.
Posted: Wed Oct 26, 2011 8:50 pm
by flatlander
mine are also held in with a screw fitting but then mine aren't venoms
Posted: Thu Oct 27, 2011 5:45 am
by blinkey501
randomsquid wrote:Falco668 wrote: Did you find one "killer" was spot welded in place and one was loose?
Mine are held in the end of the tailpipes with screws. I've not seen any the same yet so I'm guessing they're just generic baffles that someone attached.
My baffles fit in the link pipe end
Posted: Thu Oct 27, 2011 5:04 pm
by randomsquid
blinkey501 wrote:
My baffles fit in the link pipe end
I thought that was where the real ones went. Maybe I've got two lots.
