Page 1 of 1
anyone with mille swinger and exhaust??
Posted: Wed Feb 09, 2011 7:56 pm
by roosterNI
what exhaust hanger did you use? the falco one seems to sit too low beside the exhaust, deffo couldn't flick the passenger footrest out, as the can is in the way. i'm hoping a mille exhaust hanger will do but want conformation before i purchase one, do mille hanger have passenger footpegs?
Posted: Wed Feb 09, 2011 8:43 pm
by D-Rider
I have a Mille swingarm and exhaust but as I have a Hi-mount can, I have a bracket that fits to the bottom of the rear subframe rails ..... not much use to you - sorry.
Posted: Thu Feb 10, 2011 3:24 pm
by Falco9
When I converted my previous Falco to a Mille arm & exhaust I had to have a mate make up a hanger for exactly the reasons you mention.
The Mille / RSV one won't fit either
Its an easy bit of fabrication though
F9
Posted: Thu Feb 10, 2011 4:50 pm
by roosterNI
yeah i could probably knock up a bracket, only problem being the missus now has no right foot peg, and although she not on the bike too often i would still like to be able to take her out.
Posted: Fri Feb 11, 2011 3:07 am
by Falcopops
Could you space out the existing hanger to give a bit of clearance?
Posted: Sat Feb 12, 2011 1:30 pm
by roosterNI
good idea, i probably could do that, the exhaust strap would be set of too the side and would prob look well funny but it would only be temporary, she dont go out with me to often so i could just put them on when needed, making a proper full time bracket at the min, see how it turns out, might look shit!
Posted: Sat Feb 12, 2011 1:36 pm
by Samray
roosterNI wrote: might look shit
aka a unique mod ?
Posted: Sun Feb 13, 2011 11:17 am
by roosterNI
Samray wrote:roosterNI wrote: might look shit
aka a unique mod ?
lol!!
Re: anyone with mille swinger and exhaust??
Posted: Mon Feb 14, 2011 9:00 pm
by transparent_opacity
You'll have to wait a mo while the pics upload, but...
RSV swinger, Scorpion Ti can (for RSV) and with single-sided RSV hangers:
With custom hanger (no footpeg):
The latter is going spare if you want to buy it?
Posted: Mon Feb 14, 2011 9:04 pm
by D-Rider
Hi and welcome
You can't just sneak in with your first post without being spotted
Posted: Mon Feb 14, 2011 11:03 pm
by transparent_opacity
D-Rider wrote:You can't just sneak in with your first post without being spotted
Lol, been lurking round here for a while - didn't realise this was my first post! Been on the
Aprilia forum forum for 18 months or so since I bought the bike, thought I'd nosey on here again and see what the fuss is about!
Posted: Mon Feb 14, 2011 11:16 pm
by D-Rider
transparent_opacity wrote:D-Rider wrote:You can't just sneak in with your first post without being spotted
Lol, been lurking round here for a while - didn't realise this was my first post! Been on the
Aprilia forum forum for 18 months or so since I bought the bike, thought I'd nosey on here again and see what the fuss is about!
Yeah I recognised your username from "the other place" (well the slightly lengthened version of your username)
Posted: Tue Feb 15, 2011 5:55 pm
by roosterNI
i've already made a hanger up, without a footpeg, just needs tidied, so thanks for offer. so a mille hanger from an early bike is what your using?
Posted: Tue Feb 15, 2011 7:16 pm
by transparent_opacity
roosterNI wrote:so a mille hanger from an early bike is what your using?
Yes, I bought a pair from vonDutch (Ron) back in 2009 - think he's a forum user here?
They just look like the usual RSV ones to me, I loosened off all the clamps and springs etc., jiggled everything around until it fitted and then tightened back up. The stock can was a little difficult, the Scorpion Ti was a breeze!