Page 1 of 1
Evoluzione Clutch Slave
Posted: Fri Jul 17, 2009 6:52 pm
by exupmonkey
Hi all, won one of these on the bay last night, sorry if I gazzumpt anyone here but needs must as I am losing fluid. Anything to look out for when fitting it, better still, anyone got an idiots guide cause I'm a dobber with a spanner 
Posted: Fri Jul 17, 2009 7:08 pm
by D-Rider
Physically fitting it is a piece of cake - undo the bolts - remove the old one - pull the spacer of it - pop the spacer on the mpl slave and bolt it up.
The fun begins when you start bleeding the clutch fluid.
Use Kzmille's guide
https://www.ridersite.com/viewtopic.php?t=3763 and reverse bleed.
Fitting one of these at the master cylinder end will help the bleeding too.
http://www.rsvr.net/products/product-55 ... leeder.htm
Oh yes - clutch fluid - Dot 4 (or Dot 5.1) BUT NOT Dot 5
Posted: Fri Jul 17, 2009 7:38 pm
by wavey
I've not long fitted one, dead easy if you don't put the spacer on back to front (which, of course, I didn't
).
Bleeding easy - sorry, the bleeding was easy, big syringe on the banjo bolt thing, suck out the old & squirt in the new.
Posted: Fri Jul 17, 2009 7:51 pm
by exupmonkey
Posted: Fri Jul 17, 2009 11:06 pm
by joecrx
it is easy , i had no problems in bleading , and clutch is lighter,
Re: Evoluzione Clutch Slave
Posted: Mon Jul 20, 2009 4:29 pm
by Falcoholic
exupmonkey wrote:I'm a dobber
Least ya got that right.
Posted: Mon Jul 20, 2009 5:45 pm
by exupmonkey
lol...surprised it took you three days to come up with that!....it must be an age thing
The dobber
Posted: Wed Jul 22, 2009 1:25 pm
by Falcoholic
Worse than that....it took me 3 days to notice.
