Page 1 of 1
aprilia stands
Posted: Tue Nov 04, 2008 10:23 pm
by Aladinsaneuk
which of the yank model stands fit the falco?
mille? tuono? falco?
just curious for a reason
Posted: Wed Nov 05, 2008 12:07 am
by wavey
I bought the US falco stand from AF1 a couple of years ago, and I am very happy with it.
http://www.af1racing.com/store/Scripts/ ... tegory=804
Looking at the diagrams for the bikes you mention, only the falco stand looks the part.
By the way I did not cut the mounting bracket, I cut away part of the mounting bolt surround on the frame, it gives much better bracing, I can dance on that left hand footpeg. Be aware that using this method you will need a longer engine mount bolt.
Dave
Posted: Wed Nov 05, 2008 6:08 am
by Aladinsaneuk
thanks mate
Posted: Wed Nov 05, 2008 7:13 am
by woodbutcher
Did the same as wavey
Posted: Wed Nov 05, 2008 2:27 pm
by Aladinsaneuk
I just noticed that af1 had a second hand mille stand for 120 usd, with a discount - all told including shipping it came to under 100 ukp and it might have done a friend for his falco
personally I prefer my cheap firestorm solution but had to investigate on his behalf!
Posted: Wed Nov 05, 2008 7:09 pm
by minime
Aladinsaneuk wrote:I just noticed that af1 had a second hand mille stand for 120 usd, with a discount - all told including shipping it came to under 100 ukp and it might have done a friend for his falco
personally I prefer my cheap firestorm solution but had to investigate on his behalf!
There is a used RSV stand in one of the parts for sale topics for about USD 50 if I remember correctly!! on the AF1 forum...
Both the Falco or the RSV/Tuono stand will work. In the case of the RSV stand you might have to cut of the 3rd eye (top one) of the bracket. That is what I did and it work just fine!!
Posted: Wed Nov 05, 2008 8:31 pm
by Falcopops
wavey wrote:Looking at the diagrams for the bikes you mention, only the falco stand looks the part.
minime wrote:Both the Falco or the RSV/Tuono stand will work.
Wish you boys could make up your mind. I've just bought a Mille stand from the parts for sale on AF1. Now I'm not sure its going to do the job.
Posted: Thu Nov 06, 2008 1:49 am
by wavey
Falcopops wrote:I've just bought a Mille stand from the parts for sale on AF1. Now I'm not sure its going to do the job.
I hope I'm wrong, but
Falco
http://www.af1racing.com/store/Scripts/ ... tegory=804
Mille
http://www.af1racing.com/store/Scripts/ ... tegory=900
Tuono
http://www.af1racing.com/store/Scripts/ ... tegory=432
Then again, with a big hammer, a hacksaw and some duct tape you can make anything work
Dave
Posted: Thu Nov 06, 2008 4:44 am
by Falcopops
Perversely that has actually given me more confidence.
The RSV bracket is the one I've seen others fit to Falco's. The Falco and Tuono brackets I've never seen before.
Anyway I'm going to cut away the 3rd mounting hole so I'm not anticipating any issues now.
Posted: Thu Nov 06, 2008 11:54 am
by minime
http://www.apriliaforum.com/forums/show ... =sidestand
Here's some pics of my RSV bracket with the 3rd mounting hole cut off.
Posted: Mon Jan 05, 2009 12:02 pm
by mrapriliafalco
See nothing wrong with that side stand
Posted: Mon Jan 05, 2009 3:25 pm
by FlyingKiwi
My US sidestand IS from a Mille. Just chopped of the extra lug hole
Posted: Mon Jan 05, 2009 10:29 pm
by Viking
mrapriliafalco wrote:[Picture trimmed]
See nothing wrong with that side stand
Nothing wrong with the accessory either!
Posted: Mon Jan 05, 2009 10:42 pm
by D-Rider
Viking wrote:mrapriliafalco wrote:[accessory trimmed]
See nothing wrong with that side stand
Nothing wrong with the accessory either!
.... and the bike looks like it's had a good waxing ......
Posted: Mon Jan 05, 2009 10:48 pm
by Samray
I found the bike at the second try. Eventually saw the sidestand too.
