E bay Re designed sidestand
Posted: Sat May 24, 2008 10:31 am
Guys,
has anyone tried the sidestands currently on e bay supplied by `bubsywoo`?
has anyone tried the sidestands currently on e bay supplied by `bubsywoo`?
RiderSite.com - Motorcycle Forums
E bay Re designed sidestand
Page 1 of 1
Posted: Wed May 28, 2008 2:48 pm
Hey Scorpio did you buy 1?
Posted: Wed May 28, 2008 6:37 pm
I have just bought one, will let you know more once i've fitted the bugger.
Posted: Wed May 28, 2008 7:59 pm
This was my reply to the same question a couple of weeks ago, I have one fitted on my Falco -
https://www.ridersite.com/viewtopic.ph ... ght=#29023
Only got a couple of photos, one with the original stand and one with the new one off ebay.
As stated in the thread it does sticl out a bit when folded up, but could possibly mod by grinding off the stop a bit, but I aint got around to trying it yet!
https://www.ridersite.com/viewtopic.ph ... ght=#29023
Only got a couple of photos, one with the original stand and one with the new one off ebay.
As stated in the thread it does sticl out a bit when folded up, but could possibly mod by grinding off the stop a bit, but I aint got around to trying it yet!
Posted: Fri May 30, 2008 4:52 pm
no not yet, i may wait till the price comes down a bit, they dont call me "squeeky vince" for nothing, i have my reputation to keepAlkydale wrote:Hey Scorpio did you buy 1?
SideStand
Posted: Fri May 30, 2008 7:49 pm
Hi all,
Just to let u know I bought one and the bugger snapped on me! The weld on the top of the connection where it meets the top bit was weak... Luckily I was stood next to the bike when it happened and I caught my bike before damage was done
I have since, welded a huge weld all around the top of the stem, if the bastard fails again I shall be paying a visit to this guy with my calm nature switched off
Check the weld looks OK if anyone buys one of these things.....
Ur friendly lens guy.
Just to let u know I bought one and the bugger snapped on me! The weld on the top of the connection where it meets the top bit was weak... Luckily I was stood next to the bike when it happened and I caught my bike before damage was done
I have since, welded a huge weld all around the top of the stem, if the bastard fails again I shall be paying a visit to this guy with my calm nature switched off
Check the weld looks OK if anyone buys one of these things.....
Ur friendly lens guy.
Posted: Fri May 30, 2008 8:14 pm
And the quest for the stock sidestand replacement continues... 
Posted: Fri May 30, 2008 8:28 pm
US Spec , easysabestian wrote:And the quest for the stock sidestand replacement continues...
Posted: Sat May 31, 2008 5:42 pm
I know!FlyingKiwi wrote:US Spec , easysabestian wrote:And the quest for the stock sidestand replacement continues...
Posted: Sat May 31, 2008 6:21 pm
Gets my vote toosabestian wrote:I know!FlyingKiwi wrote:US Spec , easysabestian wrote:And the quest for the stock sidestand replacement continues...
Posted: Sat May 31, 2008 8:20 pm
or a WP rear shock.... my original stand is fine now :)
Posted: Sun Jun 01, 2008 8:19 am
I was all set to buy this redesigned one, but GregD's post has put me off
(the last time I had a sidestand incident cost me nearly £500 for a new fairing !)
Have seen a couple of cheap Gixxer ones on Evilbay but don't know which will be best
There's one off a '99 GSXR600 SRAD
And one that says it's off a GSXR1100................are either/both of these any good
A quick response would be appreciated, as they finish today !
(the last time I had a sidestand incident cost me nearly £500 for a new fairing !)
Have seen a couple of cheap Gixxer ones on Evilbay but don't know which will be best
There's one off a '99 GSXR600 SRAD
And one that says it's off a GSXR1100................are either/both of these any good
A quick response would be appreciated, as they finish today !