side stand wiring
Moderators: Aladinsaneuk, MartDude, D-Rider, Moderators
-
- Despatch Rider
- Posts: 47
- Joined: Mon Jun 13, 2011 4:45 pm
- Location: bulgaria
side stand wiring
Hi Chaps, can anyone advise how to re-wire my sidestand cut-out wiring? I'm left with 3 wires, brown, green and black and propose twisting some together as a bodge fix, after the little circuit board has snapped. I'll have to remember not to be riding off with the stand down.....
- Attachments
-
- 20220319_151603.jpg (3.8 MiB) Viewed 1356 times
- mangocrazy
- Admin
- Posts: 3910
- Joined: Thu Jul 17, 2008 3:24 pm
- Location: Sheffield, UK
Re: side stand wiring
On the wiring diagram the black is connected to the brown, so I'm guessing that's its 'at rest' (i.e. stand up) position. Try joining those two first. If it doesn't work connect black to green.
-
- Despatch Rider
- Posts: 47
- Joined: Mon Jun 13, 2011 4:45 pm
- Location: bulgaria
Re: side stand wiring
Thanks for that - seems joining brown and black seems to have done the job :) Now just waiting for the snow to completely melt....
- mangocrazy
- Admin
- Posts: 3910
- Joined: Thu Jul 17, 2008 3:24 pm
- Location: Sheffield, UK
Re: side stand wiring
Good stuff! Glad that worked. We've lost the snow but still have salt on the roads...