Banjo Bolts

Chat for Falco Owners.

Moderators: Aladinsaneuk, MartDude, D-Rider, Moderators

Post Reply
Message
Author
User avatar
zoidberg
SuperSport Racer
SuperSport Racer
Posts: 679
Joined: Fri Jun 04, 2010 7:27 am
Location: Cumbria

Banjo Bolts

#1 Post by zoidberg » Sat Aug 14, 2021 10:21 am

I have sourced a bar and I'm going about moving the bars above the top yoke.

Can anyone tell me the thread on the master cylinder for a double banjo bolt? I need one to replace the hoses.

Thanks.

User avatar
mangocrazy
Admin
Admin
Posts: 3903
Joined: Thu Jul 17, 2008 3:24 pm
Location: Sheffield, UK

Re: Banjo Bolts

#2 Post by mangocrazy » Mon Aug 16, 2021 8:49 am

Pretty sure it's M10 x 1.0 (that's the Brembo standard), Japanese bikes tend to be M10 x 1.25.

User avatar
zoidberg
SuperSport Racer
SuperSport Racer
Posts: 679
Joined: Fri Jun 04, 2010 7:27 am
Location: Cumbria

Re: Banjo Bolts

#3 Post by zoidberg » Mon Aug 16, 2021 12:21 pm

👌 I thought it was, just wanted confirmation.

User avatar
zoidberg
SuperSport Racer
SuperSport Racer
Posts: 679
Joined: Fri Jun 04, 2010 7:27 am
Location: Cumbria

Re: Banjo Bolts

#4 Post by zoidberg » Sat Aug 21, 2021 7:56 pm

Bars are moved. Clutch hose is a little tight at full lock. I'll look at that tomorrow. I also had to make some lock stops to stop the bars fouling the tank. I have an even worse turning circle now 🙄

User avatar
mangocrazy
Admin
Admin
Posts: 3903
Joined: Thu Jul 17, 2008 3:24 pm
Location: Sheffield, UK

Re: Banjo Bolts

#5 Post by mangocrazy » Sun Aug 22, 2021 10:25 am

Good stuff! Now we need proof in the form of pictures... :smt003

Post Reply