Page 1 of 1
m8 1.25 brake caliper bolt countersunk
Posted: Thu May 07, 2015 4:28 pm
by flatlander
- its actually to fiit tg rear disk anyone know what length they should be ?
Posted: Thu May 07, 2015 7:18 pm
by fatboy
I guess you are talking falco here ?
Mine are not c/sunk but proud, overall 20mm.
The caliper mount bracket is 10mm thick so you would need 7 or 8 mm thread length.
Just been out and measured it for you !
Thats a 2001 model so later may differ
Posted: Thu May 07, 2015 9:39 pm
by mangocrazy
As far as I'm aware front and rear disc bolts are exactly the same. And not countersunk, but flanged.
Posted: Thu May 07, 2015 11:15 pm
by flatlander
Sorry should have said its to fit an after market wavy disc
Posted: Fri May 08, 2015 1:16 am
by Dalemac
The brake caliper mounting bolts are the same front to rear and are m10x1.25x35mm (excluding the hex flange).
The disk itself is irrelevant to the mounting of the calipers...
Posted: Fri May 08, 2015 6:58 pm
by fatboy
If you had said DISC mounting bolt I would not have gone and measured the CALIPER mounting bolt.
So when I say I owe you a virtual beer, what I mean is you owe me a beer
Posted: Fri May 08, 2015 7:35 pm
by flatlander
Look at it this way I could have lied or just edited the post :)
It was something the guy who did the tyres said
Basically you want to get some of these or it won't fit and true to form I wrote half of what he said on a fag packet and now can't find said fag packet :)