Chain lube
Moderators: Aladinsaneuk, MartDude, D-Rider, Moderators
Chain lube
Getting ready to fit my MPL clutch slave cyl I was really shocked at the build up of flung off black goo around the front sprocket.
I admit Im a little zealous about spraying my chain but surely there is something better than the generic spray on crap that looks like lava under the sprocket cover ?
I admit Im a little zealous about spraying my chain but surely there is something better than the generic spray on crap that looks like lava under the sprocket cover ?
Cleverly disguised as an adult !
I'm sure many won't agree with me on this, but I have had great results using lithium grease as a chain lube.
Spray on, leave for 10 minutes, job done. Seems to be much less flingy than regular chain lube.
http://www.halfords.com/webapp/wcs/stor ... yId_165705
There's a good guide on motorcycle chain lube here
Spray on, leave for 10 minutes, job done. Seems to be much less flingy than regular chain lube.
http://www.halfords.com/webapp/wcs/stor ... yId_165705
There's a good guide on motorcycle chain lube here
This is good stuff I started using. Bit pricey, but doesn't spray off all round your tyre/bike. I always tend to put chain lube on after a ride when chain still warm. that way any excess has been absorbed ready for next ride anyway.
http://www.ebay.co.uk/itm/MUC-OFF-DRY-P ... 35cdd1b7f0
http://www.ebay.co.uk/itm/MUC-OFF-DRY-P ... 35cdd1b7f0
--------------
MattG#116
Website - www.mattgracing.co.uk
Facebook Page - https://www.facebook.com/mattgracing
WIMP - Wales Is My Playground
Current bikes -
Road bike Aprilia SL1000 Falco '00
Race bike Honda CBR600 Steelie '97
MattG#116
Website - www.mattgracing.co.uk
Facebook Page - https://www.facebook.com/mattgracing
WIMP - Wales Is My Playground
Current bikes -
Road bike Aprilia SL1000 Falco '00
Race bike Honda CBR600 Steelie '97
- Firestarter
- Twisted Firestarter
- Posts: 1429
- Joined: Thu Jan 04, 2007 8:28 am
- Location: Northwich, Cheshire
I've got a Scottoiler, haven't had a good look around the front sprocket since, but certainly there's a lot less gunk on the number plate than there used to be, and the chain looks better/cleaner.
I remember scraping the gunk out with a screwdriver when I used to use the gel stuff (Castrol stuff I think it was), really gunked everything up.
I remember scraping the gunk out with a screwdriver when I used to use the gel stuff (Castrol stuff I think it was), really gunked everything up.
Aprilia SL1000 Falco '04 in Black & Red
- mangocrazy
- Admin
- Posts: 3944
- Joined: Thu Jul 17, 2008 3:24 pm
- Location: Sheffield, UK
A scottoiler is certainly the best technical way of doing it, you want to be using a thin oil but this obviously flies off, this is where the scottoiler wins as it's a constant supply. Personally I use chain wax rather that the gluey stuff, but my mileage is low enough no have any real issue. If I was doing commuting on the bike and racking up the miles I'd certainly go scottoiler.
Pass me a hammer, a spanner and a cuppa
Smug gitMartDude wrote:Ah, thank you - a timely reminder to grease the chain on the California.
Trouble is, I can't find it.

Thanks for the suggestions, Scott oiler off budget for now, short term solution is to switch to a dry lube. or buy a shaft drive.
There you go Mart, I saved you the bother

Cleverly disguised as an adult !
- randomsquid
- Wear the Fox Hat
- Posts: 2244
- Joined: Sat Jan 29, 2011 8:10 pm
- Location: West Mids
Damn, I knew I'd forgotten to get something. Perhaps Pete will lend me his.randomsquid wrote:Cali owners generally have their chains on those nice leather hats...MartDude wrote:Ah, thank you - a timely reminder to grease the chain on the California.
Trouble is, I can't find it.
It flies sideways through time
It's an electric line
To your zodiac sign
I've got a Black and Silver Machine!
It's an electric line
To your zodiac sign
I've got a Black and Silver Machine!
- Aladinsaneuk
- Aprilia Admin
- Posts: 9503
- Joined: Wed Jan 03, 2007 10:37 pm
- Location: Webfoot territory
- mangocrazy
- Admin
- Posts: 3944
- Joined: Thu Jul 17, 2008 3:24 pm
- Location: Sheffield, UK
There are plenty of cheap alternatives to the scottoiler, some you have to turn on and off or suffer a pool of oil, some are similar to the scottoiler. I just did a quick google search and saw this, no endorsement, never heard of them before http://www.loobman.co.uk/buy.asp http://www.tutorochainoiler.com/index.p ... eed-detail this is just an example (trawl through your back issues of ride, I'm sure they reviewed loads)fatboy wrote:Smug gitMartDude wrote:Ah, thank you - a timely reminder to grease the chain on the California.
Trouble is, I can't find it.
![]()
Thanks for the suggestions, Scott oiler off budget for now, short term solution is to switch to a dry lube. or buy a shaft drive.
There you go Mart, I saved you the bother
Pass me a hammer, a spanner and a cuppa