Page 1 of 2
First peek : rsv 04+ stock cans on the falcuono
Posted: Thu Apr 26, 2007 8:58 pm
by Hansie
For my trips to Germany (and when I'm not in the mood for noise..yes I'm getting old!
) I needed some nice looking stock cans for my falcuono. (German polizei check the cans on E numbers...
)
Always like the stock RSV 04+ cans and the look of the BEF linkpipes so they have to come together...
Its a piece of 3D machined alu which will connect the round linkpipe to the oval can. Better pictures when installed!
http://www.mijnalbum.nl/Foto=ZU6KWT4H
http://www.mijnalbum.nl/Foto=6EPS7AJS
Posted: Thu Apr 26, 2007 9:04 pm
by Moose
That looks right nice Hansie
Look forward to the fitted pics
Posted: Thu Apr 26, 2007 9:08 pm
by Gio
So who made the end caps?
Any chance of a pair of cans for the price Wim used to do them at (with link pipes)?
Posted: Thu Apr 26, 2007 9:26 pm
by Hansie
I keep the BEF cans but they will be recored to make them "usable" for streetuse, to noisy now...
Dont understand what you mean Gio, the endcaps of the 04+ are stock, the BEF's are made by Wim.
Inlet caps on the 04+ are made by a local toolshop.
Posted: Thu Apr 26, 2007 9:30 pm
by Samray
Hansie wrote:
Dont understand what you mean Gio,
No chance of a copyright on that phrase mate, it's been in general usage for years.
Posted: Thu Apr 26, 2007 10:00 pm
by Gio
Hansie wrote:I keep the BEF cans but they will be recored to make them "usable" for streetuse, to noisy now...
Dont understand what you mean Gio, the endcaps of the 04+ are stock, the BEF's are made by Wim.
Inlet caps on the 04+ are made by a local toolshop.
You found the Befexausts 2 loud
I had twins on the Blackbird for about 10k miles and I never got pulled by plod and they sounded fantastic.
Those cone ends aren't stock surely?
Also inlet caps are the part that connects to the link pipe (or if only 2 piece) head pipes (At least in my book they are)
Posted: Fri Apr 27, 2007 5:29 am
by falcomunky
Gio wrote:(At least in my book they are)
Like you can read G...
Nice cans matey, btw!
Posted: Fri Apr 27, 2007 6:17 am
by Gio
falcomunky wrote:Gio wrote:(At least in my book they are)
Like you can read G...
Nice cans matey, btw!
Ah yes I see now I was thinking about the cans on my sons bike where the coned bit is at the end
I've just progressed to "Spot goes to the beach" FM
Posted: Fri Apr 27, 2007 10:18 am
by Vincent
Hansie je maakt er weer wat moois van want to see and hear them on the bike.
Vincent
Posted: Fri Apr 27, 2007 11:12 am
by Syltiz
jou taal is amper deiseflde as my taal!
Posted: Fri Apr 27, 2007 3:56 pm
by Hansie
Goodone Syltiz!
Better only use one language.
Posted: Fri Apr 27, 2007 10:50 pm
by Falcopops
Nice work matey, nothing like getting a proper job, should look great on the bike.
Fase II
Posted: Sat Apr 28, 2007 7:57 pm
by Hansie
Got some time today to mount the first one, when ive got the new hangers they can be placed some 30mm higher than this.
It looks very good and start thinking to get another set and recore them....
http://www.mijnalbum.nl/Foto=R6WEUEKG
http://www.mijnalbum.nl/Foto=WUMYTQCN
http://www.mijnalbum.nl/Foto=HPKQKMPA
Posted: Sat Apr 28, 2007 8:01 pm
by Vincent
Syltiz wrote:jou taal is amper deiseflde as my taal!
almost the same what is it south african?
Re: Fase II
Posted: Sat Apr 28, 2007 8:02 pm
by Vincent