MWR HE Induction Kit Update
Posted: Sun Nov 29, 2015 11:57 am
Hi Guys,
Just thought some of you might like to know that there has been an update to the MWR HE Induction kit MC-010-97-HE.
This was from a single piece of feedback where a few riders were experiencing that the filter foam was being partly sucked away and could get trapped and in the TB's. When Racing Filters heard of this they immediately investigated and redesigned the filter to eradicate the problem.
I had the original design installed in my Falco and had not experienced this issue at all. My engine backfired a couple of times and noticed that it had slightly caught the filter, but nothing major and being the OCD type that likes everything as perfect as possible, I contacted Wilco (CEO) and explained the situ. I now have the new design, through warranty and can see that the modifications would address the TB's issue that any of you may have experienced.
Have included a link that shows the differences between the original and new design here.
If you believe you have this problem then you need to contact Racing Filters by email (info@racingairfilters.eu) and mention this post with your filter specific details and provide images if you can. They will come back to you and they will replace it, under warranty, if found to be suffering this issue. Turn around time commitment (from the time they receive your filter) is only one day plus shipping time back to you.
Hope this helps guys and have to say that I have found Wilco to be very understanding, accomodating and true to his word - can't say fairer than that.
Just thought some of you might like to know that there has been an update to the MWR HE Induction kit MC-010-97-HE.
This was from a single piece of feedback where a few riders were experiencing that the filter foam was being partly sucked away and could get trapped and in the TB's. When Racing Filters heard of this they immediately investigated and redesigned the filter to eradicate the problem.
I had the original design installed in my Falco and had not experienced this issue at all. My engine backfired a couple of times and noticed that it had slightly caught the filter, but nothing major and being the OCD type that likes everything as perfect as possible, I contacted Wilco (CEO) and explained the situ. I now have the new design, through warranty and can see that the modifications would address the TB's issue that any of you may have experienced.
Have included a link that shows the differences between the original and new design here.
If you believe you have this problem then you need to contact Racing Filters by email (info@racingairfilters.eu) and mention this post with your filter specific details and provide images if you can. They will come back to you and they will replace it, under warranty, if found to be suffering this issue. Turn around time commitment (from the time they receive your filter) is only one day plus shipping time back to you.
Hope this helps guys and have to say that I have found Wilco to be very understanding, accomodating and true to his word - can't say fairer than that.